Accessories

Light up your camper with our interior lighting package, featuring Baja Design or Heretic Studio's waterproof push button LED Dome Lights. Our camper doors are designed to integrate 2 dome lights per door. We recommend 1 red and 1 white per door; red to save you and your campmates' night vision (plus it helps keep the bugs away), and white to really help you find what you're looking for.

Our lighting packages are offered in 3 different configurations:

• Fully Loaded (1 white and 1 red per door)
• 1 White light per door 
• 1 Red light per door
  

*Lighting Packages ordered at initial camper order or before start camper build will be installed for FREE.

** Lighting Packages purchased after camper delivery will be shipped with a wiring harness for DIY or dealer install

Air Hub AutoMagic Digital Air Controller

• 1 Air Hub Order comes with:

  • Air Hub AutoMagic Digital Air Controller
  • USB A to USB C cable
  • Hard Shell EVA Foam Storage Case

  Air Hub Features:

  • Digital user PSI selection
  • Automagic Inflation AND Deflation
  • Patent pending Set Your Pressure Technology
  • Patent pending design with high contrast backlit display
  • Visual and audible “job done” cues
  • Built in memory to recall the previously used air down and air up pressures
  • Works with ANY air source that has either a shutoff or blow off valve and 1/4″ I/M Fittings (might need an adapter)
    • Air Sources for Single tire applications need to be rated for a minimum of 1.25CFM
    • Air sources for 4 tire applications need to be rated for a minimum of 4CFM
  • Works with ANY air hose system utilizing 1/4″ I/M, A, T, or Aro fittings. Single tire or multi tire hoses.
  • High flow solenoids so that your flow restrictions are only your tire’s valve stems.
  • Lithium USB C rechargeable battery
  • Completely portable, hard mount options in the works
  • Collapsible Metal hook
  • Hard shell carrying case with EVA foam included
  • Durable and Rugged bumper guards for offroad terrain protection
  • 6 x 5 x 2.5″ just the body, without considering the couplers and slidevalve. 9.5 x 8 x 2.5″ including the couplers and slide valve
  • 3 Year “No Hassle” Warranty!

Set Your Pressure™!

• Air up a set of 35″ tires from 10 to 40 psi in under 5min (when combined with a 4 Tire Hose Kit)
• 10.6 CFM dual cylinder compressor at 0 PSI
• 6.5 CFM at 30 psi
• 10-120 psi in Auto Mode
• 1-150 psi in Manual Mode
• Thermal Cutoff Switch & Purge Valve
• 80% duty cycle @ 0psi (45min on, 10min off) (6-8 vehicles) (see duty cycle chart)
• 12v, 90amps peak, ~50amp running
• 14x7x9″ external dimensions
• 70-75 dB noise level from 1ft distance
• Beefed up carrying bag with accessory pockets
• Threaded filter caps so the compressor can be mounted in any direction/orientation (except upside down)
• USA Standard color matched air fitting – Push-to-connect “Universal” Coupler (Works with 1/4″ Industrial, Auto, or Aro fittings)
• WARNING: Compressors get hot! Recommended to wear the included MORRFlate Groovy Gloves while disconnecting air fittings.
• Since the TenSix™ is rated for 10.6 CFM, it is highly recommended to use with a MORRFlate 4 Tire Inflation & Deflation™ Kit to avoid back pressures on the compressor from filling 1 tire at a time.

Gen2 Upgrades (Also, now unique to only MORRFlate):

• Stainless Steel Outlet Hose (for better heat dissipation and heat sinking)
• Purge Valve (to release the internal pressures when done)
• Resized Aluminum heat sinks (upgraded from ABS so they actually fit the cylinders and works as a heat sink)
• Internal aluminum cylinders (upgraded from mild steel to dissipate heat better)
• New piston rings (better material for wear and heat resistance longevity).

Note About This Product: This compressor is not designed for 1 tire at a time. You can still air up a single flat if you need to, but the duty cycle dwindles to 8-10min doing 1 tire at a time. Airing up an entire vehicle, 1 tire at a time, will damage the TenSix. It just simply puts out too much air and is optimized for 4 tires at a time.

• 10.6 CFM dual cylinder compressor at 0 PSI
• 6.5 CFM at 30 psi
• 150 psi rated
• PSI Cutoff Switch (80psi on, 120psi off)
• Thermal Cutoff Switch & Purge Valve
• 80% duty cycle @ 0psi (45min on, 10min off) (6-8 vehicles) (see duty cycle chart)
• 12v, 90amps peak, ~50amp running
• 14x7x9″ external dimensions
• 70-75 dB noise level from 1ft distance
• Beefed up carrying bag with accessory pockets
• Threaded filter caps so the compressor can now be mounted in any direction/orientation (except upside down)
• USA Standard color matched air fitting – Push-to-connect “Universal” Coupler (Works with 1/4″ Industrial, Auto, or Aro fittings)
• WARNING: Compressors get hot! Recommended to wear the included MORRFlate Groovy Gloves while disconnecting air fittings.
• Since the TenSix™ is rated for 10.6 CFM, it is highly recommended to use with a MORRFlate 4 Tire Inflation & Deflation™ Kit to avoid back pressures on the compressor from filling 1 tire at a time.

Gen2 Upgrades (Also, now unique to only MORRFlate):

• Stainless Steel Outlet Hose (for better heat dissipation and heat sinking)
• Purge Valve (to release the internal pressures when done)
• Resized Aluminum heat sinks (upgraded from ABS so they actually fit the cylinders and works as a heat sink)
• Internal aluminum cylinders (upgraded from mild steel to dissipate heat better)
• New piston rings (better material for wear and heat resistance longevity).

Note About This Product: This compressor is not designed for 1 tire at a time. You can still air up a single flat if you need to, but the duty cycle dwindles to 8-10min doing 1 tire at a time. Airing up an entire vehicle, 1 tire at a time, will damage the TenSix. It just simply puts out too much air and is optimized for 4 tires at a time.

Inflate, Deflate, and Equalize air pressure in all 4 tires, all at once. See all of the uses below:

• Air up 1 to 4 tires simultaneously (Less stress on your compressor!)
• Air down 1 to 4 tires simultaneously (Less stress on you!)
• Check all of the tires’ PSI from the manifold (No more continuously bending over checking PSIs)
• Move air from a spare tire into other tires
• Effortlessly equalize tire pressures
• Run different PSI in the front tires from the back tires
• 1-150 psi, 1% accuracy, .1psi precision, back lit digital gauge
• This fits up to155″ wheelbases. To find your wheelbase, measure the distance between your front and rear axle.
• If you need a longer wheelbase, check out the MORRFlate Mega Quad Off Road 4 to 6 Tire Inflation Deflation Kit
• If your air source is in a different location, check out our MORRFlate Extensions
• All MORRFlates fit ARB compressors and PowerTanks “plug n play” If you have a Smittybilt, Viaire, Warn Powerplant, or something modeled after those, you will need a MORRFlate Adapter Kits.
• Read the entire MORRFlate Off Road 4 Tire Inflation Deflation Kit article for more detailed information!

Inflate, Deflate, and Equalize air pressure in up to 6 tires, all at once. See all of the uses below:

• Air up 1 to 6 tires simultaneously (Less stress on your compressor!)
• Air down 1 to 6 tires simultaneously (Less stress on you!)
• Check all of the tires’ PSI from one spot (No more continuously bending over checking PSIs)
• Move air from a spare tire into other tires
• Effortlessly equalize tire pressures
• Make all 4-6 tires the same pressure
• Run different PSI in the front tires from the back tires
• 1-150 psi, 1% accuracy, .1psi precision, back lit digital gauge
• This version fits up to a 200″ wheelbase with the air source in the middle of the front or rear bumper areas
• If you need a shorter wheelbase, check out the MORRFlate Quad Off Road 4 Tire Inflation Deflation Kit
• If your air source is in a different location, check out our MORRFlate Extensions
• All MORRFlates fit ARB and PowerTank fittings “plug n play” If you have a Smittybilt, Viaire, Warn Powerplant, or something modeled after those, you will need a MORRFlate Adapter Kits.
• Read the entire MORRFlate Off Road 4 Tire Inflation Deflation Kit article for more detailed information!

The MORRFlate Duo has two 13ft hoses coming off of the manifold for a total length of 26ft from air chuck to air chuck.

Inflate, Deflate, and Equalize air pressure in 2 tires, at once. See all of the uses below:

• Air up 1 to 2 tires simultaneously (Less stress on your compressor!)
• Air down 1 to 2 tires simultaneously (Less stress on you!)
• Check 2 of the tires’ PSI from the manifold (No more continuously bending over checking PSIs)
• Move air from a spare tire into another tire
• Effortlessly equalize tire pressures
• Run different PSI in the front tires from the back tires
• 1-150 psi, 1% accuracy, .1psi precision, back lit digital gauge
• If your air source is in a different location, or you need a little bit more reach, check out our MORRFlate Extensions
• All MORRFlates fit ARB compressors and PowerTanks “plug n play” If you have a Smittybilt, Viaire, Warn Powerplant, or something modeled after those, you will need a MORRFlate Adapter Kits.
• Read the entire MORRFlate Off Road 4 Tire Inflation Deflation™ Kit article for more detailed information!

Inflate, Deflate, and Equalize air pressure in all 4 tires, all at once. See all of the uses below:

• Air up 1 to 4 tires simultaneously (Less stress on your compressor!)
• Air down 1 to 4 tires simultaneously (Less stress on you!)
• Check all of the tires’ PSI from the manifold (No more continuously bending over checking PSIs)
• Move air from a spare tire into other tires
• Effortlessly equalize tire pressures
• Run different PSI in the front tires from the back tires
• 1-150 psi, 1% accuracy, .1psi precision, back lit digital gauge
• This version fits up to a 125″ wheelbase with the air source in the middle of the front or rear bumper areas, or in the center of the side of the vehicle (under seat mounted compressors).
• If you need a longer wheelbase, check out the MORRFlate Quad+ Off Road 4 Tire Inflation Deflation Kit
• If your air source is in a different location, check out our MORRFlate Extensions
• All MORRFlates fit ARB compressors and PowerTanks “plug n play” If you have a Smittybilt, Viaire, Warn Powerplant, or something modeled after those, you will need a MORRFlate Adapter Kits.
• Read the entire MORRFlate Off Road 4 Tire Inflation Deflation Kit article for more detailed information!

Description

• LiFePO4 Chemistry - Deep Cycle Battery
  
• BLUETOOTH - iOS and Android Apps
• BLUETOOTH - Epoch Pro App allows you to manage entire system of batteries from one screen (ex. 36V 50Ah setup)
• Built-in Smart Battery Management System (BMS)
• Over charge and over discharge protection
• Over current and short circuit protection
• High & low temperature disconnects
• Max (4) in Series up to 48V
• Max (4) in Parallel
• 4,000+ Cycle life & Maintenance-free
• 11 Year Manufacturer Warranty

Weights & Dimensions

Weight: 14.3 (LBS)

Dimensions:

• Length: 7.75 (inches)
• Width: 6.5 (inches)
• Height: 7 (inches)

Specifications

Description

• LiFePO4 Chemistry - Deep Cycle Battery
• HEATED - Internal heating allows for charging in sub-zero conditions
• BLUETOOTH - iOS and Android Apps
• Built-in Smart Battery Management System (BMS)
• Over charge and over discharge protection
• Over current and short circuit protection
• High & low temperature disconnects
• Max (4) in Series up to 48V
• Max (4) in Parallel
• 4,000+ Cycle life & Maintenance-free
• 11 Year Manufacturer Warranty

Weights & Dimensions

Weight: 22.1 (LBS)

Dimensions:

• Length: 10.25 (inches)
• Width: 6.75 (inches)
• Height: 9 (inches)

Specifications

The 180 XT MAX™ Awning is the ultimate solution as a free-standing shade awning in terms of massive shade coverage (8.53m² / 91.82ft²), wind resistance, and shares the same strength and durability as our famous 270 XT Awning and 270 XT MAX Awning.

The 180 XT MAX™ Awning is 90.5 inches long (2.3m) when packed up weighs only 57.3lbs (26Kg) and can be easily mounted to most roof racks or heavy-duty load bars using our Heavy Duty L Brackets (included with the awning) or to our Roof Top Tentsusing the appropriate awning to tent bracket (sold separately).

Around the inside edge of the awning is a 50mm / 2″ thick triple stitched velcro strip which can be used to attach the optional awning walls (sold separately) enabling you to fully enclose the area to provide protection from the elements or additional privacy.

Free shipping and install when purchased at time of camper purchase

Fitting the 180 XT MAX™ Awning

The 180 XT MAX™ Awning frame requires a fitment bracket attached to the stainless steel sections no more than 200mm / 7 ⁷/₈inch from each end.  The awning is not suitable to be fitted to a roof rack shorter than 1.9m / 74.8 inches in length or to load bars where the width from front to rear is less than 1.9m / 74.8 inches.  When using our Heavy Duty L Brackets (supplied with the awning) for mounting the 180 XT MAX™ awning, we recommend using one pair of the brackets, with one at each end.

Shipping:

Free shipping and installation when purchased at the time of camper purchase

Shipping Included for Orders sent to Utah

Orders shipped elsewhere freight cost will be estimated via phone call.

The 270 XT Awning Mk2 sets new benchmarks  for a free standing shade awning in terms of overall strength, wind resistance and durability.  The 270 XT Awning Mk2 provides an incredible 8sqm (86sqft) of shade around your 4WD for you to set up your camp kitchen, swags or just a shaded seating/chill out area.

The awning is 2.3m / 90.5 inches in length, weighs only 27.8Kg / 61.3lbs and can easily be set up by one person in about 30 seconds and the pack down is just as simple.

The awning is available in either a Left Hand Side (driver’s side in USA)  or Right Hand Side (passenger side in USA) configuration, please select which version you require from the drop down menu below.

There are 2 Heavy Duty L brackets supplied with the 270 XT Awning Mk2.  One fitment bracket must be attached to the stainless steel head stock at the hinged end of the awning no more than 200mm (7 ⁷/₈inch) from the hinged end, The second bracket must be mounted no less than 1.3m (4′ 3″) from the bracket at the hinged end.  To mount the awning to one of our rooftop tents you will need an Awning To Tent bracket which are sold separately.

Shipping:

Free shipping and installation when purchased at the time of camper purchase

Shipping Included for Orders sent to Utah

Orders shipped elsewhere freight cost will be estimated via phone call.