Accessories

The 270 XT Awning Mk2 sets new benchmarks  for a free standing shade awning in terms of overall strength, wind resistance and durability.  The 270 XT Awning Mk2 provides an incredible 8sqm (86sqft) of shade around your 4WD for you to set up your camp kitchen, swags or just a shaded seating/chill out area.

The awning is 2.3m / 90.5 inches in length, weighs only 27.8Kg / 61.3lbs and can easily be set up by one person in about 30 seconds and the pack down is just as simple.

The awning is available in either a Left Hand Side (driver’s side in USA)  or Right Hand Side (passenger side in USA) configuration, please select which version you require from the drop down menu below.

There are 2 Heavy Duty L brackets supplied with the 270 XT Awning Mk2.  One fitment bracket must be attached to the stainless steel head stock at the hinged end of the awning no more than 200mm (7 ⁷/₈inch) from the hinged end, The second bracket must be mounted no less than 1.3m (4′ 3″) from the bracket at the hinged end.  To mount the awning to one of our rooftop tents you will need an Awning To Tent bracket which are sold separately.

Shipping:

Free shipping and installation when purchased at the time of camper purchase

Shipping Included for Orders sent to Utah

Orders shipped elsewhere freight cost will be estimated via phone call.

270 XT MAX Awning Mk2 - Overview

The combination of forward and rear folding arms means the 270 XT MAX Awning Mk2 provides an incredible amount of shade (+/-12m² / 129ft²) around your 4WD for you to set up your camp kitchen, swags or just a shaded seating/chill out area. As you can see from the video the awning is an easy set up by one person in about 60 seconds and the pack down is just as simple.  The 270 XT MAX Awning Mk2 has a heavy duty stainless steel hinge at the rear and front section of the frame with arms that wrap around the rear of your vehicle as well as folding forward to be parallel with the side of the vehicle.

The canvas on the 270 XT MAX Awning is a 315gsm (11.3oz) poly-cotton rip-stop canvas in The Bush Company's traditional olive green colour that is mould and mildew resistant. There is only one seam in the whole canvas section (not including the edges) and the canvas is pre-treated during manufacture for water resistance, but over time if the stitched areas show signs of water ingress this is easily treated with a canvas aqua proof product to seal the stitch holes.  Where the canvas is attached to the ends of the trussed awning arms there is additional triple reinforcement to eliminate chafing, while the front and rear arms slide into a triple stitched canvas sleeve.

The 270 XT MAX Awning Mk2 bag is 460gsm (16.2oz) poly-cotton rip-stop canvas with YKK Zippers.  In contrast to PVC covers, the canvas allows the awning to breath while keeping it dust/dirt free and moisture is able to wick out through the zipper reducing the risk of mould or mildew.  The rip-stop material on the bag also reduces the risk of large running tears in the bag as a result of contact with tree branches, and the front and rear sections of the bag have a double layer of canvas providing extra protection.

The frame of the awning is made from an extruded aluminium alloy composite which has been specifically designed to provide the elasticity, strength and durability we require.  The brackets for the hinges are constructed from stainless steel providing huge strength.  The main truss arms on the awning have been gusseted for additional strength, which enables the awning to be fully free standing without any poles in even strong wind conditions.

We do not supply poles for the awning as it does not need them, but we do supply guy ropes and pegs.  It is recommended that the front and rear arms are pegged down when the awning is deployed to prevent excessive upward movement as these are reinforced but not gusseted.  The guy ropes attach to the 1 tonne webbing straps that are attached to the canvas at the ends of the arms and midway along each canvas section.

In conjunction with the natural rake of the awning, the guy ropes should be used to prevent pooling of water on the canvas and to guide water runoff in preferred places. We do not recommend leaving the awning up unattended during snowfall due to risk of canvas stretching due to excessive weight.

Around the inside edge of the awning is a 50mm (2") thick triple stitched velcro strip which can be used to attach optional awning walls (sold separately) enabling you to fully enclose the area to provide protection from the elements or additional privacy.

Shipping:

Free shipping and installation when purchased at the time of camper purchase

Shipping Included for Orders sent to Utah

Orders shipped elsewhere freight cost will be estimated via phone call.

If you’re looking to enhance privacy and shield yourself from the elements with your Bush Company Awning set-up, the ideal solution is an Awning Wall Kit. Depending on your awning, the wall kit includes 3 main walls and an additional 4th wall for the 180 XT MAX, 4 main walls and an additional 5th wall for the 270 XT, & 5 main walls and an additional 6th wall for the 270 XT MAX; which can be used to create a partition in either the front arm area or beneath the awning. The kit also provides aluminum telescopic poles that conveniently fit into pre-drilled holes in the trussed awning arms, offering added stability and support for the walls.

Note: freight is not included and is calculated on an individual basis.

The Reign 270 FR awning is a self supporting 270 degree awning. Easily deployed in under a minute by just one person.

-Powder coated aluminum with stainless steel hardware, including the backside mounting plate. No unsightly raw aluminum

-600D flame resistant (FR), waterproof ripstop oxford material. The FR awning fabric provides extra piece of mind whether you are cooking or welding near the awning. Awning fabric is grey with an olive green outer edge and navy blue accents

-Squared-off design provides full coverage at the rear of the vehicle for more usable space

-Tension strap at the edge of the awning to accommodate a wide array of vehicles and campers

-Packed dimensions - 94” L x 6” W x 7” T

-Weight - 44 lbs - one of the lightest 270’s on the market!

-83 sq ft (7.7 sq meters) of coverage

-Truss style arms provide strength while staying light weight

-Three support legs are included and secure up and out of the way on the awning arms

-Flip up rain peak

-700G PVC travel cover

-Three versatile mounting brackets, ground pegs, reflective guy wires and M8 stainless steel hardware included. Attaches to load bars, platforms and any rack with t-track

-Full perimeter Velcro strip for optional Annex Walls, Windbreaker and Accessory Panels

-Tie down points on each corner and the center of each gap for drainage

-$150 shipping in the lower 48

SAVE UP TO $51 ON A 2-PACK W/ HD CASE!

The LightRanger 2000 is the ultimate telescoping LED lantern. Packed with brightness and unmatched control through our new Bluetooth app, the LightRanger 2000 takes the best features of our LightRanger lantern line to a whole new level to greatly enhance every outdoor activity at night. The world's best portable area light just got better. Ideal for camping, overlanding, RV, outdoor cooking, backyard sports, emergency preparedness, home improvement, first-responders, and commercial applications.

BUY A 2-PACK ULTIMATE KIT & SAVE $86

High-power rechargeable LED lantern with telescoping pole, tripod, carry bag, 20-watt USB-C charging adapter & charging cord. Provides overhead lighting for camping, backyard and other outdoor activities at night as well as power outages, home improvement and construction projects.

The perfect companion to your LightRanger rechargeable LED lantern. Provides off-grid charging for a brighter outdoor adventure just about anywhere.

NOW Includes 30-Degree Angled Receiver to perfectly integrate with the LightRanger 800, 1200, 2000, or 4000 for optimized solar charging. Reducing charge times by as much as 30%. Includes a coiled USB-C to USB-C charging cord for a cleaner look.

• Fully charges LightRanger 800 or 1200 in as little as 5 hours of daylight*
• Fully charges LightRanger 2000 in as little as 8 hours of daylight*
• Patent-pending molded receiver w/spring pin securely attaches to top of Lantern
• NEW - 30 Degree Angled Receiver helps optimize charging in spring & fall
• Ultra compact & lightweight - 25" x 8" x .18" / weighs only 1.1 lbs
• Includes coiled USB-C to USB-C charging cord for a clean look
• USB-C port - max output: 5V/3.1A. 9V/2A, 12V/1.5A (PD 18Watts Max)
  
• USB-A port - max output: 5V/2.4A
• Total max output: 20 Watts when both ports used together
• Conveniently charge other electronic devices
• Patented PERC technology for high solar conversion efficiency (23%.)
  
• 1 Year Warranty

*Like other solar panels, charge times may vary based on time of year and how direct the sunlight hits the panel. Optimal solar output occurs April through September. Charge times increase outside of the summer months. Charge time is longer for the LightRanger 2000 due to the higher capacity battery size.

The perfect complement to protect and store your LightRanger telescoping LED lanterns. The Heavy-duty Carry Case holds up to (2) LightRanger kits, (2) 20-watt solar panels, (2) AMPak 10 portable power banks, (2) colored filter kits,  (2) motion sensors, charging cords and other gear.

• 45"L x 9"W x 5"H
• Heavy-duty nylon construction
• 2 zipper opening for ease of use
• Large interior velcro pocket for solar panel storage
• Carry handles and padded carry strap for comfort
• Removable interior separation divider helps protect lights from impacting each other on those long washboard roads
• Genuine leather Devos accent badge

The AMPak 20 is our higher-output power bank that integrates with LightRanger telescoping LED lanterns to dramatically extend the run time. The AMPak 20 was designed with higher capacity to better support Devos' brighter 2000 and 4000 lumen lanterns.

Run Time Extension by LightRanger (at max lumens):

• LightRanger 800 by 300% + (An additional 10 hrs)
  
• LightRanger 1200 by 150% + (An additional 6 hrs)
  
• LightRanger 2000 by 90% + (An additional 3 hrs)
• LightRanger 4000 by 90% + (An additional 3 hrs)

Features:

• Powerful 73 Watt hour Li-ion battery
• Patent-pending molded receiver for perfect integration with any LightRanger (800, 1200, or 2000, or 4000)
• USB-C w/ fast charge protocol (PD protocol) - can be charged at 26 watts / output to charge other devices up to 20 watts
• Compact profile: 4.75” x 4.75” x 2.2” and weighs only 16 ounces
• 2 USB-C charge ports (one input / one output)
• IPX6 waterproof (can resist high-pressure, heavy sprays of water)
• Stackable with a 20-watt solar panel for a complete off-grid eco-system
• Includes USB-C to USB-C coiled cord (expands from 14" to 40" for a cleaner look. 90 degree bend on the USB-C connectors prevent cord from being under too much stress while connected.)

A slightly more compact version of our original heavy-duty carry case, this 37" version fits 2 LightRanger 1200's nice and tight (if you're not looking for extra space above the light for colored filter kits or AMPak10 power banks) or 2 LightRanger 800's with a couple of inches of space to spare.

It's also a perfect solution for single unit LightRanger customers that still want added protection from a heavy-duty padded nylon case in a more compact footprint.

Capacity:

• LightRanger 1200: (2) LightRanger 1200 kits, (2) Ground stakes (2) 20-watt solar panels and charging cords. Other accessories (AMPak10 power bank and motion sensor) can fit between the poles. Filter kits can fit stacked on the lantern head.
• LightRanger 800: (2) LightRanger 800 kits, (2) 20-watt solar panels, (2) AMPak10 portable power banks, (2) motion sensors, and charging cords.

Features & Benefits

• 37"L x 9"W x 5"H
• Heavy-duty nylon construction
• 2 zipper opening for ease of use
• Large interior velcro pocket for solar panel storage
• Carry handles and padded carry strap for comfort
• Removable interior separation divider helps protect lights from impacting each other on those long washboard roads
• Genuine leather Devos accent badge